Paddies, Materials and Production

Woodcutter’s Hut and Storage Yard

Full Steam release · Sources checked November 19, 2026

The short answer

In Jyoka -Castle town-, the Woodcutter’s Hut sends workers to the nearest forest, then to a storage yard, then back to the hut. Place the three legs of that route close together. A hut next to trees can still be slow if the loaded walk to the yard or the return to the hut is long.

On this page

Plan the triangle instead of one short walk

Stand back from the placement view and identify the intended forest, the buildable spot for the hut, and the place where timber will go. The official description uses this exact chain to explain construction logistics. The whole circuit is the route to judge, so check the return to the hut as well as the walk from trees to storage.

When comparing two locations, first rule out places where a required building cannot fit. A shorter-looking route on the map is only useful if workers can make the trip. Terrain and room for structures matter around a constrained castle site. Treat the nearest available trees and the actual approach as hypotheses to confirm with the workers after construction.

Compare two workable arrangements

If the hut can sit beside the forest but storage must be much farther away, consider whether moving the hut or site for the yard shortens the overall circuit. If storage is near the center of town and the forest is further out, watch where the workers would carry the load before deciding how much to prioritize the central location.

You can test a comparison without assuming a fixed walking speed or route formula. Follow one staffed hut cycle and note where the workers go. The developer gives the order of legs and the nearest-forest behavior, but does not publish a pathfinding rule for each obstacle. Where the constructed route differs from the plan, use the path you see to guide the next placement.

Distinguish staffing from travel

If no timber is arriving, check that the hut can run and has a worker before blaming travel distance. Then see whether a worker reaches the forest and carries a load away. A worker spending a long time on a visible route tells you something different from a facility that never gets staffed. Check what is actually missing before starting another hut.

Once the loop runs, compare its pace with timber use. A falling stock does not by itself mean the layout is faulty if several new buildings are spending timber. Look at deliveries and consumption over the same interval. Use Resources+ if the stock you need is not pinned to the HUD.

Keep the first working route useful as the town grows

If you are adding something to the same area, check whether that choice leaves enough room for the part of the route that needs improvement. You can leave a clear path and place nearby production before committing to more extensive changes. On a tight starting site, preserving a working circuit is often a safer first move than building a second incomplete one.

When a newly built structure changes what you can see or where workers actually travel, follow one more full delivery. Note the slow leg and compare that measurement with the reason you expanded in the first place. A layout that gets wood reliably to storage may already solve the immediate shortage even if another arrangement looks neater on the map.

What to check before you move on

A staffed worker takes the expected forest-to-storage loop, and you know which leg you would shorten if timber output cannot keep up.

Sources & version

Release notes and developer replies linked below. is the guide’s revision date.